![]() The Live Commentary section will automatically let you choose between any microphones or headsets that are connected to, or built into, your PC. Mute the Audio Preview - you will not hear audio come out of your computer, but your recording will still have audio. ![]() Disable the Video Preview window - you will not see video in the software, but your recording will still have video.The Control Bar also has a few buttons that let you: If you want to initiate Flashback Recording, then move the blue bar to the left, until you get to the point where you want to begin, and then press the red button to start Recording.If you want to rewind video, move the blue bar to the left.If you are using Live Commentary, then the Commentary button will be glowing blue. Press the blue button to start and stop Live Commentary.If you are Live Streaming, then the Stream button will be glowing green. Press the green button to start and stop Live Streaming.If you are Recording, then the Record button will be glowing red. Press the red button to start and stop Recording.The Control Bar is perhaps the most important part of the Elgato Game Capture HD software. Here is a screenshot of the Capture Section: The interface is only slightly changed cosmetically from version 1.0 or version 2.0 of the software, but this article will assume that you are not familiar with those earlier versions.Įdit Section - Editing and Playback ControlsĮlgato Game Capture HD 3.6 software has 4 main sections:Įach section will be discussed in more depth in this article. This is from the Windows version of the application. If none of the above steps help, or there is no USB 3.0 controller available at all, we can recommend the following USB 3.1 PCIe card from Asus for desktop PCs:ĪSUS Dual Type-A PCIe Card USB 3.1 TYPE-A CARDĪsus USB 3.1 Type-A Card (PCIe x4, Windows 7, Windows 8, Windows 8.1, USB 3.This article gives a general summary of all aspects of the Elgato Game Capture HD 3.6 software interface. If the Game Capture HD60 S is detected as a USB 2.0 device instead USB 3.0, try using a powered USB 3.0 hub.Īlternatively, you can try a USB-C to USB-A adapter such as the ones below: If both USB ports are occupied by high bandwidth device such as USB capture devices, external hard drives, webcams, etc the available bandwidth may be used up. These controllers are used for pairs of USB ports. USB ports are controlled by what is called a USB controller. Please make sure the USB hub is USB 3.0 compatible.ĭisconnecting other devices or connecting them to different ports can help. There could be bandwidth issues if too many devices are connected to the same internal USB hub or controller. ![]() Try connecting the Game Capture device to those USB ports as well. Other USB ports, such as USB 3.1 and USB 3.2 are backwards compatible and support USB 3.0 devices. ![]() Many motherboards have USB 3.0 controllers from different manufacturers, therefore it's worth to try to connect the Game Capture device to a different USB port, which is internally connected to a different USB controller. Instead, these ports use basic Microsoft drivers which cannot be re-installed. Some USB controllers, such as Intel, do not have separate drivers. Other controllers usually also work fine with Microsoft's drivers. This will ensure that the Game Capture device is able to connect, and has the best possible performance. Make sure to install latest drivers provided by your motherboard or notebook manufacturer for the USB 3.x controller. Unplug the device from the USB port and plug it back in.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |